For such an important concept, the question "What is Design?" appears to yield answers with limited usefulness. Dino Dini states that the design process can be defined as "The management of constraints". He identifies two kinds of constraint, negotiable and non-negotiable. The first step in the design process is the identification, classification and selection of constraints. The process of design then proceeds from here by manipulating design variables so as to satisfy the non-negotiable constraints and optimizing those which are negotiable. It is possible for a set of non-negotiable constraints to be in conflict resulting in a design with no solution; in this case the non-negotiable constraints must be revised. For example, take the design of a chair. A chair must support a certain weight to be useful, and this is a non-negotiable constraint. The cost of producing the chair might be another. The choice of materials and the aesthetic qualities of the chair might be negotiable.
It should be noted that "the management of constraints" may not include the whole of what is involved in "constraint management" as defined in the context of a broader Theory of Constraints, depending on the scope of a design or a designer's position.
phrase "Well, back to the old drawing board" makes light of the fact that designs sometimes fail and redesign is necessary. The phrase has meaning beyond
structural designs and is an idiom when a drawing board is not used in a design.
Redesign
Something that is redesigned requires a different process than something that is designed for the first time. A redesign often includes an evaluation of the existent design and the findings of the redesign needs are often the ones that drive the redesign process.
[edit] Typical steps
A design process may include a series of steps followed by designers. Depending on the product or service, some of these stages may be irrelevant, ignored in real-world situations in order to save time, reduce cost, or because they may be redundant in the situation.
Typical stages of the design process include:
- Pre-production design
- Design during production
- Post-production design feedback for future designs
- Redesign - any or all stages in the design process repeated (with corrections made) at any time before, during, or after production.
[edit] Philosophies and studies of design
There are countless philosophies for guiding design as the design values and its accompanying aspects within modern design vary, both between different schools of thought and among practicing designers.[7] Design philosophies are usually for determining design goals. A design goal may range from solving the least significant individual problem of the smallest element to the most holistic influential utopian goals. Design goals are usually for guiding design. However, conflicts over immediate and minor goals may lead to questioning the purpose of design, perhaps to set better long term or ultimate goals.
[edit] Philosophies for guiding design
A design philosophy is a guide to help make choices when designing such as ergonomics, costs, economics, functionality and methods of re-design. An example of a design philosophy is “dynamic change” to achieve the elegant or stylish look you need.
[edit] Approaches to design
A design approach is a general philosophy that may or may not include a guide for specific methods. Some are to guide the overall goal of the design. Other approaches are to guide the tendencies of the designer. A combination of approaches may be used if they don't conflict.
Some popular approaches include:
- KISS principle, (Keep it Simple Stupid, etc.), which strives to eliminate unnecessary complications.
- There is more than one way to do it (TMTOWTDI), a philosophy to allow multiple methods of doing the same thing.
- Use-centered design, which focuses on the goals and tasks associated with the use of the artifact, rather than focusing on the end user.
- User-centered design, which focuses on the needs, wants, and limitations of the end user of the designed artifact.
[edit] Philosophies for methods of designing
-
Main article: Design methods
Design Methods is a broad area that focuses on:
- Exploring possibilities and constraints by focusing critical thinking skills to research and define problem spaces for existing products or services—or the creation of new categories; (see also Brainstorming)
- Redefining the specifications of design solutions which can lead to better guidelines for traditional design activities (graphic, industrial, architectural, etc.);
- Managing the process of exploring, defining, creating artifacts continually over time
- Prototyping possible scenarios, or solutions that incrementally or significantly improve the inherited situation
- Trendspotting; understanding the trend process.
[edit] Philosophies for the purpose of designs
In philosophy, the abstract noun "design" refers to a pattern with a purpose. Design is thus contrasted with purposelessness, randomness, or lack of complexity.
To study the purpose of designs, beyond individual goals (e.g. marketing, technology, education, entertainment, hobbies), is to question the controversial politics, morals, ethics and needs such as Maslow's hierarchy of needs. "Purpose" may also lead to existential questions such as religious morals and teleology. These philosophies for the "purpose of" designs are in contrast to philosophies for guiding design or methodology.
Often a designer (especially in commercial situations) is not in a position to define purpose. Whether a designer is, is not, or should be concerned with purpose or intended use beyond what they are expressly hired to influence, is debatable, depending on the situation. Not understanding or disinterest in the wider role of design in society might also be attributed to the commissioning agent or client, rather than the designer.
In structuration theory, achieving consensus and fulfillment of purpose is as continuous as society. Raised levels of achievement often lead to raised expectations. design is both medium and outcome generating a Janus like face, with every ending marking a new beginning.
[edit] Terminology
The word "design" is often considered ambiguous depending on the application.
[edit] Design and art
Design is often viewed as a more rigorous form of art, or art with a clearly defined purpose. The distinction is usually made when someone other than the artist is defining the purpose. In graphic arts the distinction is often made between fine art and commercial art.
In the realm of the arts, design is more relevant to the "applied" arts, such as architecture and industrial design. In fact today the term design is widely associated to modern industrial product design as initiated by Raymond Loewy and teachings at the Bauhaus and Ulm School of Design (HfG Ulm) in Germany during the 20th Century.
Design implies a conscious effort to create something that is both functional and aesthetically pleasing. For example, a graphic artist may design an advertisement poster. This person's job is to communicate the advertisement message (functional aspect) and to make it look good (aesthetically pleasing). The distinction between pure and applied arts is not completely clear, but one may consider Jackson Pollock's (often criticized as "splatter") paintings as an example of pure art. One may assume his art does not convey a message based on the obvious differences between an advertisement poster and the mere possibility of an abstract message of a Jackson Pollock painting. One may speculate that Pollock, when painting, worked more intuitively than would a graphic artist, when consciously designing a poster. However, Mark Getlein suggests the principles of design are "almost instinctive", "built-in", "natural", and part of "our sense of 'rightness'."[8] Pollock, as a trained artist, may have utilized design whether conscious or not.
A drawing for a booster engine for
steam locomotives. Engineering is applied to design, with emphasis on function and the utilization of mathematics and science.
[edit] Design and engineering
Engineering is often viewed as a more rigorous form of design. Contrary views suggest that design is a component of engineering aside from production and other operations which utilize engineering. A neutral view may suggest that both design and engineering simply overlap, depending on the discipline of design. The American Heritage Dictionary defines design as: "To conceive or fashion in the mind; invent," and "To formulate a plan", and defines engineering as: "The application of scientific and mathematical principles to practical ends such as the design, manufacture, and operation of efficient and economical structures, machines, processes, and systems.".[9][10] Both are forms of problem-solving with a defined distinction being the application of "scientific and mathematical principles". How much science is applied in a design is a question of what is considered "science". Along with the question of what is considered science, there is social science versus natural science. Scientists at Xerox PARC made the distinction of design versus engineering at "moving minds" versus "moving atoms".
[edit] Design and production
The relationship between design and production is one of planning and executing. In theory, the plan should anticipate and compensate for potential problems in the execution process. Design involves problem-solving and creativity. In contrast, production involves a routine or pre-planned process. A design may also be a mere plan that does not include a production or engineering process, although a working knowledge of such processes is usually expected of designers. In some cases, it may be unnecessary and/or impractical to expect a designer with a broad multidisciplinary knowledge required for such designs to also have a detailed knowledge of how to produce the product.
Design and production are intertwined in many creative professional careers, meaning problem-solving is part of execution and the reverse. As the cost of rearrangement increases, the need for separating design from production increases as well. For example, a high-budget project, such as a skyscraper, requires separating (design) architecture from (production) construction. A Low-budget project, such as a locally printed office party invitation flyer, can be rearranged and printed dozens of times at the low cost of a few sheets of paper, a few drops of ink, and less than one hour's pay of a desktop publisher.
This is not to say that production never involves problem-solving or creativity, nor that design always involves creativity. Designs are rarely perfect and are sometimes repetitive. The imperfection of a design may task a production position (e.g. production artist, construction worker) with utilizing creativity or problem-solving skills to compensate for what was overlooked in the design process. Likewise, a design may be a simple repetition (copy) of a known preexisting solution, requiring minimal, if any, creativity or problem-solving skills from the designer.
My "award winning" creativity can frame your message with imagery and interactive media that speaks louder than words. Influencing a community or organization to participate or change their perception takes sensitivity matched with strong character. I can deliver your message with the right tone and sensitivity. 
Web applications can also help organize and maintain your website, and even empower your partners to maintain their own web pages. My web service can develop useful web applications such as events calendars, schedule planners, and retailer look ups, as well as integrating location map technology. 
For people or businesses seeking to increase memberships or subscriptions, I can create subscription forms and a secure website featuring a member log in. Sites can allow members to track accomplishments, download professional literature, or print special coupons, to name a few activities. 
Erik M. Zettersten 
